Relay Card Products - compatible with our USBDIO24, SERDIO24 & NI DIO24/6503 Digital I/O Card products         

 
 
DIO24MxS2 Relay Card

DIO24MxS2 Relay Card (Click for further images)

DIO24MxS2 relay card, fitted with 10A relays & 2 part (right angle) screw terminal blocks.   (Right angle connector pair height - approx 23mm)

  

USBDIO24 mounted above a DIO24MxS2 (24 channel) relay card

 
       
 

Connects directly to our USBDIO24, SERDIO24 or NI DIO24/6503 Digital I/O DAQ card products via standard 50 pin I/O connector.

  • Provides access to all relay contacts and digital I/O channels via industry standard  two part screw terminal connectors.

  • All channels can be configured as either inputs or outputs via onboard links.

  • Male/Female connector halves allow rapid disconnection of relay card from target system if required.

  • Relay card can be disconnected and used elsewhere if required without the need to rewire all connections.

  • 24 onboard relays, capable of switching 10 Amps @ 250V AC.

  • PCB tracking will handle 6 Amps @ 20 Deg C.

  • Internal LED status indicators for each channel.

  • Datasheet available for relay type used on this card.

  • Opto-isolated digital control inputs.  Provides voltage isolation of 5000V AC.

  • Relays can be activated via any suitable digital (5V) input signal.

  • Requires external 12V DC power supply to power the relay cards (also available).  Requires 750 mA max per relay card (if all relays are switched on).  PSU connects via rear panel sockets on each card or via screw terminal connection.

  • A perspex cover is available that can be fitted, via standoff pillars,  over the relay card and screw terminals for additional protection (see perspex cover).

  • Similar to DIO24Mx relay board but with screw terminal connector rather than header or D Types connectors.

  • Supplied with all female mating halves.

  • Approximate dimensions: 23cm (L) x 12.7cm (W) x 2.3cm (H).  Weight approx 550 grams.

Plus.......... a range of cable assemblies  (see DAQ cable assemblies)  for rapid configuration and set-up of a low cost test and instrumentation systems.

 

DIO24MxS2 relay card - fitted with right angle (90 Degree) screw terminal blocks

 
Order Code: DIO24MxS2Card
Cost: £145 (+ VAT )
*
What will this cost in my local currency?
 
Actual price will be charged in GBP (£ Sterling) when order is processed.  Prices are subject to UK VAT where appropriate.  Customers from the USA, Canada, Australia, New Zealand and all other non EEC customers will not be charged UK VAT.  Shipping on these products is free (Worldwide).
 
DIO24MxS2V Relay Card (identical to above card but supplied with vertical orientation screw terminal blocks)
 

DIO24MxS2 relay card, fitted with vertical screw terminal blocks

 
Order Code: DIO24MxS2VCard
Cost: £145 (+ VAT )
What will this cost in my local currency?
 
Actual price will be charged in GBP (£ Sterling) when order is processed.  Prices are subject to UK VAT where appropriate.  Customers from the USA, Canada, Australia, New Zealand and all other non EEC customers will not be charged UK VAT.  Shipping on these products is free (Worldwide).