USBDO96 & DIO96 Adaptor card - pre-assembled relay stack options        

Low-cost, pin compatible with the National Instruments PXI-6508, PCI-6509, PCI-DIO96 & DAQPAD6508, 96 channel Digital I/O DAQ (100 pin) cards

DIO96StackKit (DIO96Adapter card with four ribbon cable assemblies + spacer pillars)

DIO96Adapter card mounted as a stack with four DO24PRMx relay cards (can be mounted with any card from our DIO24Mx relay card range)

The DIO96 adaptor card is available together with our full range of 24 channel relay cards as a pre-assemble stack, providing a low cost solution for connecting large numbers of relays in a variety of configurations.

This adaptor card is designed to connect/mount directly with our USBDO96 digital output card and also the NI PXI-6508, PCI-6509, PCI-DIO96 & DAQPAD6508 Digital I/O DAQ cards via the standard NI split ribbon cable assembly options.  (Requires a standard NI R1005050 or NB5 ribbon cable assembly (100 way, which splits to two 50 way header connectors) to connect the 96 channel NIDAQ cards to the two mating 50 way IDC connectors on the Adaptor card).

• Convenient stack of relays in relatively small cubic area.

• Available for use with any relay cards from our DIO24Mx product range.  (Relay cards need to be ordered separately).

• Can be used in conjunction with our USBDO96 card to control upto 96 relays in a stack as shown in the above images.

• This card can also be used in our 2U and 3U shelf product range to create large relay switching system designs

• Designed to be quickly assembled with upto four cards from of our Mx range of 24 channel relay cards as a convenient stack (see picture).

• Pre-assembled, includes ribbon cables and pillars etc Provides access to all DIO96 signals via the four mating (50 pin) IDC connectors.

• Stack can be supplied with a perspex cover and DIN rail mount base plate, if required, for added protection of the cards.

• Adaptor card is passive, and supplied with nylon feet, allowing it to be safely located on any surface.

• If connecting the DIO96Adapter to a NI DIO96 you will require a standard NI R1005050 or NB5 ribbon cable assembly (100 way, which splits to two 50 way header connectors).  This connects the 96 channel NIDAQ cards to the two mating 50 way IDC connectors on the Adaptor card).  (NI ribbon cable Part number 182762-01 (1 metre long) or 182762-02 (2 metre long).

• DIO96Adapter card approximate dimensions: 21cm(L) x 12.7cm(W) x 12cm(H - inc feet).

• 12V DC power supply to power the relay cards (also available).  Requires 750 mA max per relay card (if all relays are switched on).  PSU connects via rear panel sockets on each card or via screw terminal connector blocks.

The DIO96StackKit can be mounted as a stack with any of the following 24 channel relay cards: 

(Note: Relay cards need to be ordered separately - please click on the relevant link below for the card you want to order)