E Series Multifunction DAQ (68 pin) Products            

Low-cost, National Instruments-compatible test and Instrumentation add-on products for the NI E Series family of Multifunction DAQ (68 pin) cards

(View image when directly connected to DAQ card in rear of PC)

Connects directly to E-series 68-pin NI DAQ cards via a standard 68 pin I/O connector.

• Provides access to all DAQ analogue and digital channels via through plated holes adjacent to the 68 pin I/O connector.

• Allows cross-connection of any one of the DAQ signals appearing at the 68 pin connector to any (or all) of the 25 pins available at the 25 way D type connector.

• Available with the option of either a male or female 68 way connector (female version can be connected directly into DAQ card, male version connects via cable assembly).

• All connection holes are sized to take test point pins if required or link wiring.

• 25 way D Type connector (female) provided to enable users to connect their own wiring.

• Provision of 5 spare IC/component positions for designers to add their own components.

• All IC positions provided with two rows of holes, allowing an IC (or socket) to be fitted, and user wiring to be soldered to the outer row of holes.

• Provision of three power tracks running across the card to each of the spare IC positions

• Access to the three voltage rails is available via three clearly marked pads along one edge, for connection of an external power supply if required.

• Approximate dimensions: 8.5cm(W) x 8cm(D).