GEN8PRMx (fitted with eight 240VAC/10Amp relays)

These low cost, general purpose, cards are fitted with 8 opto-isolated relays  and designed to be operated/controlled by normal digital input voltage signals from a designers own digital hardware or existing DIO/DAQ cards. 

Available with a choice of two relay types, either 240VAC/10A power or high sensitivity, gold contact signal relays (Max 30VDC @ 1Amp) and the option of either fixed or two-part (male/female) screw terminal blocks.

Access to all relay contacts is via either fixed or two part (male/female) screw terminal block connectors  along the edge of the card.  Suitable for a wide range of control and mains voltage power switching, or signal switching purposes .  The card comes with LED relay channel & +5V supply status indicators and nylon feet in each corner which will take self tapping screws or allow the cards to be stacked.  The card requires a +5V DC supply (Max current approx 750mA with all relays activated).

There is also a perspex cover available which offers general protection of the card and prevents accidental contact with any of the relay contacts or screw terminal connections.  In addition, there is a DIN rail mount/cover option available.

Compatible with Windows 98SE/ME/2000/XP/Vista, MacOSX and Linux platforms.

Available with LabView, Visual Basic, Visual C, VEE & Delphi example programs (see the 'downloads' section of our website).

        GEN8PRMx2 (fitted with eight 10A relays & 2 part (male/female) screw terminal blocks)

Features:

• Two relay options available, either 10A/240V power, or 1A/30V signal relays.  PCB tracking will handle 10 Amps
• Datasheet gives full details including spec for the relay types available for this card.
• Relays are SPDT, Form C, changeover type, with N/O, COM and N/C contacts taken to the screw terminal blocks along each side of the card
• Opto-isolated (digital inputs to relays) - isolation to 2500V AC (rms)
• LED status indicators for power and relay activation status
• Digital input control signals are compatible with normal TTL logic level digital voltages.  Each input requires a low drive current of no more than 2.5mA (5.25V DC Max)
• Supplied with nylon feet (will take self tapping screws).  Corner mounting holes allow cards to be stacked if required
• Clear, protective cover/base, and also DIN rail mountable base & cover options available
• CЄ compliant, BS9001:2000 manufacture
• Free shipping on this product (Worldwide)

GEN8PRMx - fitted with 8 power relays and fixed screw terminal blocks

CoverUSB  - shown fitted to a USB8PR2 card - can also be used with the GENPR/SRMx cards

(Perspex cover and base - fitted with 4 nylon feet)