USB8VI4DIOSR (fitted with eight 1A high sensitivity signal relays & fixed screw terminal blocks)

see other views

This card is available as a low cost, general purpose USB powered 8 channel voltage input, 4 channel DIO and 4 channel relay card.  Voltage input and DIO/relay channels are opto-isolated.  Available with a choice of either 240VAC/10A power or 30VDC/1A high sensitivity (gold contact) signal relays, and either fixed or two part (male/female) screw terminal connectors.  Suitable for a wide range of voltage measurement applications and signal switching, automation/control, and mains voltage power switching purposes.  USB powered and hot swappable, with USB power, voltage input and relay channel status indication LED's. 

Available with LabVIEW, LabWindowsCVI, VB, VC, C#, Java, VEE, & Delphi examples available (click on the 'downloads' button below).

COVERUSB - perspex cover available

(shown fitted to a different product)

• Low cost, USB powered DAQ module -  USB1.1 or 2 compatible (Type B USB connector)
• Available with LabVIEW, LabWindowsCVI, Visual Basic, Visual C, C#, Java, VEE or Delphi example control programs
• OS compatibility:  Win98SE/ME/2K/XP/Vista, Windows 7, Windows CE, Mac OSX and Linux
• Uses same software drivers as used in our range of serial port cards - previously developed code can be reused
• Can also be controlled with direct command input from terminal emulation programs (such as Windows HyperTerminal)
• High input voltage range (DC, Opto isolated) (Logic High): 5V to 100V (DC max), Logic Low 0V to 1.5V
• Screw terminal and (14W) header connector access to 8 Voltage input and 4 DIO channels
• Two relay options available, either 10A/240V power, or 1A/30V high sensitivity (gold contact) signal relays.  PCB tracking will handle 10 Amps.  Above datasheet link gives full details/spec for the relay types available for this card.
• Opto-isolated - USB isolation from relays to 2500V AC (rms)
• LED status indicators for USB connection/power and voltage input channel/relay activation status
• 0V/5V available at screw terminal connectors for onward powering (300mA max), relay switching, contact closure purposes etc
• Relays are SPDT, Form C, changeover type, with N/O, COM and N/C contacts taken to the screw terminal blocks along each side of the card
• Relay contact resistance 100mOhms Max
• Relay Operate 12mS /release time 7mS Max (inc software overhead)
• All relay contacts taken to screw terminal blocks.  Option of either fixed or 2 part (male/female) screw terminal blocks, as shown in image
• Supplied with nylon feet (will take self tapping screws).  Corner mounting holes allow cards to be stacked if required
• Clear, protective perspex cover/base option, spare mating connectors and USB cable also available
• CЄ & RoHS compliant, BS9001:2000 manufacture

CoverUSB  - illustration only (image shows cover fitted to a USB8PR2 card)

Perspex cover and base - fitted with 4 nylon feet