USBDAQ1208LSP (fitted with four 10A relays & 2 part screw terminal blocks)

This card is a powerful, low cost, small profile, general purpose USB DAQ module.  Suitable for a wide range of measurement, monitoring, control and data acquisition purposes.  USB powered and hot swappable. 8 analogue input channels (1.2kS/sec), 16 DIO, and 2 DAC channels.  4 onboard relays - choice of power or signal relays and 2 part (male/female) screw terminal connectors.  Based on the Measurement Computing^TM PMD1208LS DAQ device (MC^TM is a National Instruments owned company).   Available with LabView, Visual Studio, .NET & VS.NET drivers & examples.

see other views

USBDAQ1208LSP (fitted with four 10A relays & f2 part screw terminal blocks) - shown with perspex cover fitted

• Low cost, USB powered DAQ module -  USB1.1 or 2 compatible (Type B USB connector)
• Based on a Measurement Computing^TM PMD1208LS DAQ device.  (MCC^TM is a National Instruments owned company)
• Available with LabVIEW, Visual Studio .NET and VS.NET drivers & control examples.  Calibration/test utilities and virtual instrument DAQ software is also available (free)
• Screw terminal access to all PMD1208 signals.  Two part (male/female) connectors allow rapid connection or disconnection and swap or reuse of card elsewhere
• Eight single ended (11 bit) analogue input channels (or four (12 bit) differential).  1.2kS/s continuous scan rate (1 channel).

• Analogue input voltage range +10V to -10V DC (or 0 to +20V DC)
• Sixteen digital I/O signals.  Four of these are connected to onboard relays (12 spare)
• Two relay options available, either 10A/240V power, or 1A/30V signal relays.  PCB tracking will handle 10 Amps.
• Relays are SPDT, Form C, changeover type, with N/O, COM and N/C contacts taken to the screw terminal blocks along each side of the card
• Two analogue output channels (12 bit).  Output voltage range: 0 to 4.096 VDC (1mv per bit). (@ upto 10,000 updates per second)
• One event counter channel (32 bit)
• Supplied with nylon feet (will take self tapping screws).  Corner mounting holes allow cards to be stacked if required.
• Onboard LED for power/test functions
• Clear, protective cover/base option, spare mating connectors and USB cable also available
• C Є compliant, BS9001:2000 manufacture

USBDAQ1208LS - fitted with four power relays and two part (male/female) screw terminal blocks

CoverUSB  - shown fitted to a USB8PR2 card

(Perspex cover and base - fitted with 4 nylon feet)