This card is a low cost USB powered 24 channel DIO card.  Hot swappable, it is pin compatible with the NI DIO24/6503 card and can also be used with any of our range of DIO24Mx relay cards.  Available with LabVIEW, Visual Basic, Visual C, VEE or Delphi example programs.  Corner mounting holes allow these cards to be stacked or mounted directly above a DIO24Mx relay card, or combined with other cards in our product range.

see other views

USBDIO24 mounted above a DIO24MxS2 (24 channel) relay card

• Low cost, USB powered and controlled -  USB1.1 or 2 compatible (Type B USB connector)
• Available with LabVIEW, Visual Basic, Visual C, VEE or Delphi example control programs
• Uses same software drivers as used in our range of serial port cards - previously developed code can be reused
• Can also be controlled with direct command input from terminal emulation programs (such as Windows HyperTerminal)
• Can be used with any of our range of DIO24Mx (24 channel) relay cards
• DIO connections are pin compatible with NI DIO24 (6503) digital I/O cards
• Corner mounting holes allow the USBDIO24 to be stacked with any other cards from our USB range or mounted above the DIO24Mx relay cards
• LED status indicators for USB connection/power
• Each channel operates at normal logic level voltages and is capable of supplying 10mA per channel
• DIO connections are via a 50 way latching header connector (male)
• 24 way screw terminal adapter available, gives screw terminal access to all USBDIO24 signals
• Supplied with nylon feet (will take self tapping screws)
• Clear, protective cover/base option and USB cable also available
• CЄ compliant, BS9001:2000 manufacture

USBDIO24 & screw terminal adapter (DIO24STAM)

USBDIO24 - fitted with 50W male header connector - nylon mounting feet in each corner

CoverUSB  - shown fitted to a USB8PR2 card

(Perspex cover and base - fitted with 4 nylon feet)