USBDO96 - 96 channel digital output card

This card is a low cost USB powered 96 channel digital output card.  Hot pluggable, it is pin compatible with our DIO96Adapter, our range of 96 channel relay stacks, and our 2U (up to 96 channels) and 3U (up to 192 channel) shelf options.

It is also pin compatible with the NIDAQ DIO96, PXI-6508, PCI-6509, PCI-DIO96 & DAQPAD6508 cards.

Available with LabVIEW, Visual Basic or C example programs.  Corner mounting holes allow these cards to be stacked or mounted directly above our DIO96Adapter  card and relay stacks/ products.

Separate backplane assembly available for incorporation into your own hardware system.

USBDO96 mounted in one of our shelf assemblies together with four 24 channel relay cards

see our shelf assembly options here

USBDO96 shown mounted on the rear of a DIO96Adapter backplane with our 3U shelf product.  Shelf will accommodate up to 8 relay cards (192 relays)

• Low cost, USB powered and controlled -  USB1.1 or 2 compatible (Type B USB connector)
• Available with LabView, C++ and Visual Basic example control programs
• Can also be controlled with direct command input from terminal emulation programs (such as Windows HyperTerminal)
• Can be used standalone or with our DIO96Adapter card
• Output channels use 74HCT type devices.  These are specified as: VOL = 0.4V, VOH= 3.7V, IOUT= 4mA.
• Digital connections are pin compatible with the NIDAQ DIO96, PXI-6508, PCI-6509, PCI-DIO96 & DAQPAD6508 cards digital I/O cards
• Corner mounting holes allow the USBDO96 to be stacked with any other cards from our USB range or mounted above the DIO96Adapter & DIO24Mx relay card product range
• LED status indicators for USB connection/power
• DIO connections are via two 50 way latching header connectors (male)
• Supplied with nylon feet (will take self tapping screws)
• Clear, protective cover/base option and USB cable also available
• CЄ compliant, BS9001:2000 manufacture

USBDO96, DIO96Adapter & four 24 channel relay card stack

see our stack assembly options here

USBDO96  - fitted with two 50W latching male header connectors

USBDO96  - fitted with two 50W latching male header connectors

USBDO96BPKit  - DIO96 Backplane assembly with USBDO96 mounted on backplane, with mating ribbon cables & pillars etc  - can be used for connecting to any of our range of DIO24Mx relay cards or used in conjunction with your own hardware configuration

As above but with USBDO96 mounted on DOIO96Adapter card, with mating ribbon cables & pillars etc  - can be used for connecting to any of our range of DIO24Mx relay cards (in a stack) or used in conjunction with your own hardware configuration

CoverUSB  - shown fitted to a USB8PR2 card but can be used with the USBDO96

(Perspex cover and base - fitted with 4 nylon feet)